International Chemical Safety Cards

HEXAFLUMURON ICSC: 1266

HEXAFLUMURON
1-(3,5-Dichloro-4-(1,1,2,2-tetrafluoroethoxy)phenyl)-3-(2,6-difluorobenzoyl)urea
C16H8Cl2F6N2O3
Molecular mass: 461.1
CAS # 86479-06-3
RTECS # CV3800000
ICSC # 1266
TYPES OF
HAZARD/
EXPOSURE 		ACUTE HAZARDS/
SYMPTOMS 		PREVENTION FIRST AID/
FIRE FIGHTING
FIRE Liquid formulations containing organic solvents may be flammable. Gives off irritating or toxic fumes (or gases) in a fire.

In case of fire in the surroundings: all extinguishing agents allowed.
EXPLOSION


EXPOSURE


  • INHALATION

    		• Avoid inhalation of fine dust and mist.
    		Fresh air, rest.
  • SKIN

    		• Protective gloves.
    		Rinse skin with plenty of water or shower.
  • EYES

    		• Safety spectacles.
    		First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
  • INGESTION

    		• Do not eat, drink, or smoke during work. Wash hands before eating.

    SPILLAGE DISPOSAL STORAGE PACKAGING & LABELLING
    Do NOT wash away into sewer. Sweep spilled substance into sealable containers; if appropriate, moisten first to prevent dusting. Carefully collect remainder, then remove to safe place (extra personal protection: P2 filter respirator for harmful particles).
    		Provision to contain effluent from fire extinguishing. Separated from food and feedstuffs. Well closed.
    		Do not transport with food and feedstuffs.
    SEE IMPORTANT INFORMATION ON BACK
    ICSC: 1266 Prepared in the context of cooperation between the International Programme on Chemical Safety & the Commission of the European Communities © IPCS CEC 1993 No modifications to the International version have been made except to add the OSHA PELs, NIOSH RELs and IDLH values.

    International Chemical Safety Cards

    HEXAFLUMURON ICSC: 1266

    I

    M

    P

    O

    R

    T

    A

    N

    T



    D

    A

    T

    A
    PHYSICAL STATE; APPEARANCE:
     COLOURLESS SOLID OR WHITE POWDER.

    PHYSICAL DANGERS:

    CHEMICAL DANGERS:
     The substance decomposes on burning producing toxic and corrosive fumes including nitrogen oxides, hydrogen chloride, hydrogen fluoride.

    OCCUPATIONAL EXPOSURE LIMITS (OELs):
     TLV not established.


    		ROUTES OF EXPOSURE:
     The substance can be absorbed into the body by inhalation.

    INHALATION RISK:
     Evaporation at 20°C is negligible; a nuisance-causing concentration of airborne particles can, however, be reached quickly on spraying or when dispersed, especially if powdered.

    EFFECTS OF SHORT-TERM EXPOSURE:

    EFFECTS OF LONG-TERM OR REPEATED EXPOSURE:
     The substance may have effects on the blood , resulting in formation of methaemoglobin.
    PHYSICAL
    PROPERTIES
    Melting point: 202-205°C
    Relative density (water = 1): 1.7
    Solubility in water: none (<0.1 g/100ml)
    		Vapour pressure, Pa at 25°C: negligible
    Octanol/water partition coefficient as log Pow: 5.68
    ENVIRONMENTAL
    DATA
         		The substance is very toxic to aquatic organisms. In the food chain important to humans, bioaccumulation takes place, specifically in fish. The substance may cause long-term effects in the aquatic environment. Avoid release to the environment in circumstances different to normal use.
    N O T E S
    If the substance is formulated with solvent(s) also consult the card(s) (ICSC) of the solvent(s). Carrier solvents used in commercial formulations may change physical and toxicological properties. Consult, Hexafluron, Trueno are trade names.
    ADDITIONAL INFORMATION


    ICSC: 1266 HEXAFLUMURON
    © IPCS, CEC, 1993
    IMPORTANT LEGAL NOTICE: Neither NIOSH, the CEC or the IPCS nor any person acting on behalf of NIOSH, the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use. The only modifications made to produce the U.S. version is inclusion of the OSHA PELs, NIOSH RELs and IDLH values.